Chimney Sweep in Garland, TX | Dayspring Chimney Sweep

Chimney Sweep in Garland - One Flat Price, You See What We See

A flat-price sweep with a camera inspection and photo report included. If we find something that needs attention, you see the picture before you hear a price - and we will tell you when it can wait.

Flat price quoted before we book

10+
Cities Served
Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Trusted Chimney Sweep for Garland Homeowners

A wood-burning fireplace in Garland earns its keep across a mild winter, but every fire leaves creosote on the flue walls. That residue accumulates, and once it reaches a certain thickness it burns hot enough to crack a liner or start a chimney fire. We’ve been cleaning and repairing chimney systems since 2016, and we’ve learned that most Garland homeowners don’t want a sales pitch; they want a straight answer about what’s in the flue and what it takes to make it safe. Call (855) 974-6812. We answer 24/7. Fast dispatch, 7am-7pm.

Call (855) 974-6812

Chimney Sweep Services

Chimney Sweep Services means the full job: we inspect the flue, clear the creosote and soot, and then tell you plainly what condition the system is in. You need this service when you’ve burned through a season or two of fires, when you can’t remember the last time the flue was cleaned, or when you’ve just bought an older Garland home and have no service history to go on. The Dayspring Chimney Sweep approach is to clean and then diagnose, so a brush run is followed by an honest assessment of the liner, the mortar joints, and the crown. Most standard sweeps in Garland fall in the $180 to $340 range, and the written estimate sets the final price. If we find a problem, we can fix it in-house instead of handing you off to a stranger.

What a Standard Sweep Covers

We work from the firebox up, brushing the flue with the right size and stiffness of brush for your liner material, then vacuuming the debris out of the firebox so nothing is left on the hearth. The chimney cap and crown get a visual check while we’re at it. You get a clear report on what we found.

What a Standard Sweep Covers

When to Book Without Waiting

If you’ve burned more than a cord of wood since the last cleaning, or if you notice a heavy, tar-like glaze on the flue walls, book sooner rather than later. Glazed creosote is the kind that ignites. Calling early beats calling after a close call.

When to Book Without Waiting
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (855) 974-6812

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Cleaning

Chimney Cleaning is about removing the buildup that causes chimney fires, and the timing matters. The classic rule is to clean once a year or after every cord of wood burned, whichever comes first, but a Garland homeowner who runs the fireplace most winter evenings will hit that mark faster than someone who lights it a few times a season. We use drop cloths and a high-efficiency vacuum so the living room stays clean, then check the smoke chamber and damper while we have the access. chimney sweep pricing for a routine clean typically runs $180 to $340, and the written estimate sets the final price before any work starts. If a camera inspection turns up a cracked liner, we can quote the repair the same visit.

Creosote Grades and What They Mean

Creosote builds in three stages: a light soot that brushes off easily, a flaky crust, and a hard glazed layer that needs more than a standard brush. We identify the grade during the clean, and that determines how much work the flue needs. Knowing which stage you’re at is the whole point of an inspection.

Keeping the House Clean

Soot travels, so we seal the firebox opening and run the vacuum at the flue as we work. Floors and hearths get covered before a brush comes out. You shouldn’t have to clean up after us.

Fireplace Cleaning

Fireplace Cleaning goes beyond the flue to the firebox, the damper, the smoke shelf, and the glass or screen on a fireplace insert. You need it when soot has built up on the firebox walls, when ash has piled around the grate, or when the fireplace hasn’t been opened in a season or more. Dayspring Chimney Sweep handles the firebox scrape-down, the ash removal, and the damper check in the same visit as the flue clean, so you aren’t booking two appointments. Fireplace cleaning in Garland generally runs $120 to $250 depending on the size of the firebox and whether the insert has glass doors that need attention. The written estimate you get up front is the final price.

Inserts and Glass Doors

An insert has its own airflow path, and soot collects on the glass faster than it does in an open firebox. We clean the viewing glass and check the gasket seal while we’re there. A worn gasket lets air leak and changes how the insert burns.

Ash and Damper Care

A damper that sticks open is a heat loss and a draft problem; one that won’t open is a smoke problem. We test the damper and clear ash from the firebox floor. Neither is a big job, but both affect how the fireplace behaves.

Chimney Services

Chimney Services is the broader category: cleaning, repair, and restoration, all under one company so problems don’t get passed around. You need it when your system has more than creosote going on, such as a spalling crown, crumbling mortar joints, a cracked flue tile, or a liner that was never right for the appliance. Dayspring Chimney Sweep installs DuraFlex liner systems and works with HeatShield resurfacing to bring a chimney back to safe operating condition. Repair pricing varies with the scope of work, and a full liner replacement is a larger investment than a routine sweep; the written estimate sets the final price. Where most sweeps stop at cleaning, we carry the parts and the skill to close the loop.

Repair Without the Handoff

When we spot a deteriorating crown or a failing liner joint, it’s the same crew that quotes and performs the repair. No subcontractor shows up after the inspection. That keeps the diagnosis and the fix connected.

Repair Without the Handoff

One Visit for Two Venting Systems

The chimney flue and the dryer exhaust are the two venting systems in a home most tied to fire risk. We clean both in a single appointment if you’d like. That’s fewer vendors and one clear report on both.

Chimney Sweep Certified

Chimney Sweep Certified means the technician doing the work has been trained and tested on chimney inspection, cleaning, and repair practices rather than learning on your roof. Certification matters because a sweep who can’t read a flue can miss a cracked tile that later feeds a fire. We work to professional trade standards and document what we find. If a certified sweep recommends a repair you can’t verify, ask for the camera footage, and any reputable company will show it. Garland pricing for a certified sweep runs the same $180 to $340 typical range, and the written estimate fixes the number before we begin.

What Certification Actually Covers

It includes proper brush selection for the liner type, safe access on the roof, and recognizing the difference between normal wear and a defect that needs repair. It also means knowing when a job is outside the scope of a clean and calls for resurfacing or relining.

Why It Matters on an Older Home

A Garland house built decades ago may have a clay-tile liner at the end of its service life. A trained eye catches the early signs before a fire does. Certification is how you know the person on the roof will recognize them.

Gas Fireplace Cleaning

Gas Fireplace Cleaning is a different job from a wood flue sweep, and a gas unit needs it too, even though it produces no creosote. You need it when the flame has gone yellow instead of blue, when the logs look dull with soot, or when the burner hasn’t been serviced in several seasons. Dayspring Chimney Sweep cleans the logs, the burner, and the glass, checks the venting, and confirms the fireplace is drawing properly. Gas fireplace cleaning in Garland typically runs $120 to $250, and the written estimate sets the final price. Because a gas appliance burns without visible smoke, homeowners often assume it needs nothing, but soot and dust still collect.

Flame Color and Venting

A steady blue flame means clean combustion; a lazy yellow one can point to a venting or air-mix issue. We check the vent path along with the burner. If something looks off, we say so.

When to Have It Looked At

Any time you smell gas, hear a popping ignition, or notice soot on the logs, stop using the unit and have it looked at. Those are reasons to call a professional rather than open a manual. The venting has to be verified, not guessed at.

Chimney Maintenance

Chimney Maintenance is the routine that keeps a chimney from turning into a repair bill: annual cleaning, an inspection, and small fixes handled before they grow. You need it every year you burn wood, and it’s especially worth doing on a home you’ve just bought and haven’t had inspected. Dayspring Chimney Sweep checks the crown, the flashing, the mortar joints, and the cap each visit so a hairline crack gets sealed before it becomes a leak. Routine maintenance cleaning in Garland runs $180 to $340, and the written estimate covers anything beyond a standard clean. We’d rather tell you your chimney is fine than sell you work it doesn’t need.

What a Yearly Inspection Catches

Small cracks in the crown, loose mortar, and a cap that’s come loose are all cheap to fix early and expensive to ignore. An inspection is a look at the whole system, not just the flue. We note anything we find and tell you whether it can safely wait.

Timing Around the Burning Season

Late summer and early fall are when the backlog builds, so booking before the first cool snap gets you ahead of it. There’s no need to wait for a problem to schedule the yearly clean. Regular timing is part of the maintenance itself.

Brands We Service

We work with professional-trade brands because the parts matter as much as the labor. DuraFlex liner systems are what we install when a flue needs relining, and they’re built for the heat and the fit a chimney demands. HeatShield is the resurfacing system we use to restore a damaged flue from the inside without a full tear-out. We also work with Olympia Chimney and Copperfield components where they fit the job.

Each brand has its own installation details and wear points, and knowing them is what separates a repair from a guess. When a cap or a liner joint fails, we know where to look. Whether you have DuraFlex, Olympia Chimney, or any other make, we can help.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Signs You Need a Pro Right Now

  • A strong, tar-like smell from the fireplace. That odor is creosote, and heavy buildup is what fuels a chimney fire. A clean flue doesn’t smell like that.
  • Yellow or lazy flames in a gas unit. It can signal incomplete combustion or a venting problem. This one should be checked before the fireplace is used again.
  • Smoke rolling back into the room. A blocked flue, a closed damper, or a draft issue can cause it. It means the smoke isn’t going where it should.
  • Visible cracks in the firebox or flue tiles. A cracked liner lets heat reach framing it was never meant to touch. It needs a camera inspection to see how far the damage goes.
  • Water stains or a crumbling crown on the roof. A failing crown lets water into the masonry, and that drives bigger repairs over time. It’s worth catching early.

Our Process, Step by Step

  1. 1
    Book and confirm. We schedule your visit and confirm what you’re seeing, so the right equipment comes along. Call (855) 974-6812. We answer 24/7.
  2. 2
    Protect the space. Drop cloths go down and the vacuum is set at the flue before any brushing starts. Keeping the house clean is part of the job.
  3. 3
    Clean and inspect. We brush the flue and clean the firebox, then run a camera up the flue to look for cracks, gaps, and buildup the brush can’t reach. What we see, you can see.
  4. 4
    Report and explain. We walk you through what we found in plain terms and tell you what needs fixing now, what can wait, and what it involves. No pressure.
  5. 5
    Repair if needed. If a liner, crown, or mortar repair is called for, we quote it in writing and do the work in-house with DuraFlex or HeatShield materials where they apply.

How Much Does Chimney Sweep Cost in Garland?

A typical chimney sweep in Garland runs $180 to $340 depending on the flue length, how much creosote has built up, and whether the roof access is straightforward. A fireplace cleaning lands around $120 to $250, and a gas fireplace cleaning sits in that same range. Those are estimates, and the written estimate you get before work begins is the price that counts.

What affects the number: the grade of creosote (a glazed layer takes more work than soot), the size and number of flues if the home has more than one, and whether the chimney cap or crown needs attention while we’re up there. A standard sweep on a single flue is the lower end; a heavy buildup or a difficult roof gets toward the top.

How to avoid overpaying: ask for the estimate in writing, ask whether an inspection is included, and never accept a liner replacement you can’t see evidence for. Camera footage should back up any major recommendation, and you should get to watch it. A sweep who can’t show you the problem shouldn’t be quoting a fix for it.

What’s included in a free estimate: we assess the flue and firebox, explain what we find, and give you a written price. Nothing gets recommended without evidence you can look at yourself. Call (855) 974-6812.

Our Service Area Near Garland

Garland sits at the center of our service area, and we also work in McLendon-Chisholm, Talty, Crandall, Farmersville, Rowlett, Sachse, Murphy, Sunnyvale, and Heath. Drive times are generally short across the area, so scheduling is flexible. If you’re nearby, we book a chimney sweep or a chimney sweep without a long wait. We’ll confirm your address when you call.

Serving Garland, TX – Our Local Coverage Area

We serve Garland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions About Chimney Sweep in Garland

Schedule Your Chimney Sweep Service in Garland Today

Book your chimney sweep with a company that cleans, explains, and repairs in-house when something needs fixing. We work with DuraFlex, HeatShield, and other professional-trade brands, and we show you the evidence before we recommend anything. Call (855) 974-6812 for a free, no-obligation estimate. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday.

Written by Greg Marsh, Owner at Dayspring Chimney Sweep, serving Garland since 2016.

Why Garland Chooses Dayspring Chimney Sweep

We set the standard for chimney sweep in Garland.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Garland

Getting your chimney sweep handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney sweep needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney sweep pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Garland Customers Say

Trusted by homeowners across Garland and surrounding areas.

★★★★★

"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."

Ramon Morales · Verified customer
★★★★★

"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."

Andre Jackson · Verified customer
★★★★★

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

Rafael Herrera · Verified customer

Ready for Chimney Sweep in Garland?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in Garland.

(855) 974-6812

Request a Free Estimate in Garland

Tell us about your chimney sweep needs. We'll respond within the hour.

By sending this request, you agree to our Privacy Policy and consent to receive communications by telephone, text message, or email about your request, including by the independent professionals who may fulfill it.

Local Service Coverage
Call Now - We Answer 24/7