Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Talty
If you burn wood in Talty, you’re not doing it for the look of the thing. Most of the homes out here heat with the fireplace or the stove, at least on the cold nights, and that changes what a sweep needs to check. We serve Talty from our base in Garland, and we come ready to clean and to repair, because the two usually show up in the same visit on acreage homes and older ranches. Call (855) 974-6812 to book. We answer 24/7, and fast dispatch from 7am to 7pm runs Sunday through Friday.
Why Talty Homeowners Call Dayspring Chimney Sweep for Chimney Sweep
Dayspring has been at this work since 2016, and Talty has become one of the places we know best in Kaufman County. Lots are spread out, driveways are long, and a lot of what we see is a manufactured home or a ranch with a freestanding stove rather than a showpiece masonry fireplace. That shapes the job. The crew arrives expecting to work on real heat-producing systems, not decorative ones, and expecting to find the kind of creosote that builds when a stove sits all summer and then gets fired hard in January.
We carry the parts, not just the brushes. When a flue liner is degraded or a chimney cap is missing, we fix it in the same visit with trade-grade materials like DuraFlex and Olympia Chimney rather than handing you a report and a phone number for someone else. That matters most on the shared and adjacent flue chases common in Talty, where a small defect doesn’t stay small. And we don’t quote a number until we’ve run a camera and shown you what it’s looking at.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Fireplace Cleaning in Talty
Fireplace Cleaning in Talty means more than brushing soot off a firebox: it means pulling the creosote out of a flue that has been worked hard through short, sharp winters and then left alone through humid summers. A typical fireplace cleaning in Talty runs $150 to $275, and the annual sweep with a Level 1 inspection usually lands at $185 to $325. You need it when you’re seeing glaze on the flue walls, when the fire smokes back at startup, or when it’s just been more than a year since anyone looked. We bring a camera and a photo report so you can see the inside of your own chimney before you agree to anything.
What the Sweep Covers
We work the firebox, the smoke chamber, the damper and the flue with the right brush for the liner, then vacuum the whole run so nothing ends up on your floor. First-degree creosote comes out cleanly; heavier glaze gets noted and priced separately. The camera check happens after the sweep, so what we show you is the cleaned flue, not a worst-case shot from before.
When to Book Before Winter
Book in the fall, before the first real freeze, because that’s when stoves across Talty get lit for the first time in months on top of a summer’s worth of buildup. A pre-season sweep costs far less than discovering a cracked liner on the coldest night of the year. If you’ve already had a hard freeze and a smoky first burn, call and we’ll get you on the schedule.
Chimney Services in Talty
Chimney Services in Talty cover the whole system, not just the flue: the crown, the cap, the chase, the mortar and the liner. A Level 1 inspection runs $95 to $175 as part of a sweep, a Level 2 camera inspection with a photo report runs $225 to $425, and creosote removal beyond the standard sweep starts around $300 depending on how much glaze is on the walls. We take on soot removal and cap replacement in the same trip. The reason it matters here is the housing. Talty’s manufactured homes and older ranches often share an adjacent flue chase with a neighbor, and a missing cap or a degraded liner on one side lets smoke and odor move into the other.
Inspections and Camera Work
A Level 2 inspection uses a camera down the flue and gives you a photo record of what’s actually there, which is the only way to settle a question about a liner or a shared chase. We show you the images and tell you plainly whether the work can wait. Nothing gets recommended without evidence you can see.

Repair Readiness
We’re qualified to apply HeatShield resurfacing to a damaged flue, and we stock DuraFlex and Olympia Chimney liners and caps. That means a degraded liner or a failed cap gets resolved by the same company that found it, with no subcontractor handoff. Brick crowns and mortar joints get repaired too, before a cleaning turns into a rebuild.

Trusted Brands We Service in Talty
We stock and install professional-trade components for Talty customers, so turnaround is quick and the parts are the right ones. Olympia Chimney caps are our usual fix when a shared chase is pulling cross-drafts from a neighbor’s appliance. DuraFlex liners go into flues that have cracked or corroded past resurfacing, and Famco and Copperfield components round out the supply for stoves, inserts and venting. These are the brands certified restoration contractors use, not big-box substitutes, and we carry them on the truck so a cap or a liner doesn’t mean a second appointment weeks later. If your existing system is one of these, we’ll service it; if it isn’t, we’ll tell you what it’s actually rated for.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Talty Homes
- A neighbor’s appliance venting into a shared or adjacent flue. In a manufactured home or an older ranch with a common chase, one side’s smoke can be pulled back through the other’s damper, especially on a cold snap. A missing cap or a degraded liner on the neighbor’s side is often the whole cause, and a camera inspection finds it fast.
- First-degree creosote building through dormant summers. Wood stoves that sit untouched through humid North Texas weather and then get fired hard after the first freeze build creosote quickly. That buildup is what a pre-season sweep is for.
- Tight roof access on narrow county roads and acreage lots. Long driveways and close-set trees slow a sweep down, and when the job waits, spalling brick or a cracked crown turns a cleaning into a repair. We plan for the access before we arrive.
- Stoves and inserts instead of masonry fireplaces. A freestanding stove has its own venting rules and needs a sweep who knows the difference. We check the connector, the flue and the cap as one system.
Pricing for Chimney Sweep in Talty, TX
Here’s what things typically run in Talty. A standard fireplace cleaning is $150 to $275. An annual sweep with a Level 1 inspection is $185 to $325. A Level 2 camera inspection with a photo report is $225 to $425, and heavier creosote removal beyond the standard sweep starts around $300. A chimney cap replacement usually runs $175 to $375 depending on the model and the chase. What moves the number is how much glaze is on the flue, whether the cap is missing, and how much roof access the lot allows. The estimate is free, and the written estimate sets the final price. Nothing gets added afterward. Call (855) 974-6812 for an exact quote.
We Also Serve Cities Near Talty
Our chimney sweep team travels out from Garland across Kaufman and the surrounding counties. Beyond Talty, we cover chimney sweep work in McLendon-Chisholm, Crandall and Farmersville, along with Garland itself. If you’re on the line between towns, call and we’ll tell you straight whether you’re in range. Estimates are free either way.
Serving Talty, TX – Our Local Coverage Area
We serve Talty and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Talty
Because the two systems likely share an adjacent or common flue chase, and pressure differences pull odor through the gap when one appliance runs. In a manufactured home or an older ranch with a tight chase, a missing chimney cap or a degraded liner on the shared stack is usually the cause. A Level 2 camera inspection finds it. Call (855) 974-6812 for an exact quote; estimates are free.
Once a year, even with light burning. Dormant humid summers followed by a hard first freeze are exactly the pattern that builds creosote fast, and a stove used only during cold snaps can still load its flue over a season. Book the sweep before winter. Call (855) 974-6812 for an exact quote.
Start with a Level 2 inspection, because a long-dormant flue can hide a cracked liner, a blocked flue or a failed crown that won’t show from the firebox. The camera shows you what’s there before you light a fire. Call (855) 974-6812 for an exact quote; estimates are free.
Usually, yes. On nearby acreage lots, we’ve run a Level 2 camera inspection, found a degraded liner and a missing cap on a shared chase, replaced the cap with an Olympia Chimney model and swept out first-degree creosote from the firebox and smoke chamber, and the cross-draft stopped. Call (855) 974-6812 for an exact quote.
Rarely, but it happens. A Level 3 inspection is for cases where the camera can’t reach a defect or the chimney’s construction itself is in question, and on some older stone fireplaces that means opening a section to look. We only recommend it when the evidence points there, and we show you why. Call (855) 974-6812.
Call (855) 974-6812 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by Greg Marsh, Owner at Dayspring Chimney Sweep, serving Talty since 2016.