Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Garland?
In Garland, a standard chimney cap installed professionally usually runs $180 to $420, and a crown rebuild or resurfacing typically costs $400 to $1,200. Both jobs together, which is common when an older cap has failed and the crown underneath has started to pit, generally land between $600 and $1,450. Those are estimates for the 2026 local market, not a fixed quote. The written estimate you get after we look at the top of your chimney sets the final price.
A cap and a crown do two different jobs, and it’s worth knowing which one is failing before you spend anything. The cap is the metal or mesh cover that keeps water, birds, and debris out of the flue. The crown is the concrete or mortar slab on top of the chimney that sheds water away from the brick. When either one goes, water gets into the masonry and the problems start compounding. At Dayspring Chimney Sweep, we diagnose both at the same visit so you’re not paying two companies to look at the same chimney.
Key Takeaways
- Typical Garland chimney cap installation: $180 to $420 depending on the flue size and whether it’s a stock or custom fit.
- Typical crown rebuild or resurfacing: $400 to $1,200, with full rebuilds at the top of that range.
- Doing cap and crown together is usually cheaper than two separate visits.
- Garland’s clay soil shifts with wet and dry seasons, which is one reason crowns crack here and need attention.
- Free estimates, and we carry the professional-grade parts to do the repair the same trip when the job allows.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s how the numbers break down for a typical single-flue chimney in Garland. These ranges account for the size of the flue, the height and pitch of the roofline, and whether we’re replacing existing parts or building from scratch.
| Line Item | Typical Garland Range | What It Covers |
|---|---|---|
| Standard stock chimney cap (single flue) | $180 – $320 | Stainless or galvanized cap sized to a common flue, bolted or clamped on |
| Custom-fit chimney cap (multiple flues or oversized) | $320 – $420 | Made-to-measure cover for a flue that doesn’t match stock sizing |
| Crown repair with sealant (surface cracks only) | $400 – $650 | Cleaning, prep, and sealing hairline cracks before water gets in |
| Crown resurfacing (HeatShield or similar cement-based overlay) | $550 – $950 | A new water-shedding surface over a sound but pitted crown |
| Full crown rebuild (crown removed and re-poured) | $750 – $1,200 | Broken crown taken off, new crown formed with proper overhang and slope |
| Cap plus crown together (same visit) | $600 – $1,450 | Both jobs done while we’re already on the roof |
What pushes a job toward the top of these ranges: an oversized or multi-flue chimney that needs a custom cap, a crown that’s cracked all the way through instead of just on the surface, and a steep or high roofline that takes more time to work safely. What keeps it lower: a small single flue with a crown that only needs sealing, and a repair scheduled before a small crack turns into a broken crown, which is the single most common reason a $500 job turns into a $1,000 one. If the flue liner itself turns out to be damaged while we’re up there, that’s a separate repair with its own cost range, and we’ll walk you through it rather than hand you a surprise line item.
What Affects Chimney Cap & Crown Pricing in Garland
No two roofs here look the same, and the price follows the details. These are the factors that move the number the most in Garland.
- Flue size and count. A single standard flue can take a stock cap. Two flues close together, or a flue that was built oversize, usually needs a custom-fit cover, which lands near the top of the cap range.
- Condition of the crown. A surface crack that gets sealed now sits at the low end of crown pricing. A crown that’s crumbled through, letting water straight into the masonry, needs a full rebuild and tops the range.
- Roof height and pitch. A one-story ranch with a gentle roof is fast to work. A two-story home with a steep pitch takes a different setup and adds labor time. We account for that in the estimate rather than after the fact.
- Garland’s soil and climate swing. The black clay soil under much of this area swells when it’s wet and shrinks when it’s dry, and that movement works on foundations and masonry above them. Chimney crowns that were poured without a proper expansion gap or overhang often crack sooner here than homeowners expect.
- Age of the chimney. Homes built in the older neighborhoods around downtown Garland and the Forest/Jupiter area frequently have crowns poured decades ago, some without a liner. Older crowns are more likely to need a rebuild than a reseal.
- Material choice. A galvanized cap costs less up front but rusts faster in our wet springs and humid summers. A stainless cap costs a bit more and lasts longer, which is why we usually steer toward stainless for a home you plan to keep.
How to Save on Chimney Cap & Crown
The biggest savings come from timing and from combining work. A few practical moves:
- Bundle the cap and crown in one visit. We’re already on the roof with the parts. Doing both together is almost always less than two separate appointments.
- Fix cracks while they’re small. Sealing a $400 to $650 surface crack now beats a $750 to $1,200 full rebuild later, and it keeps water out of the flue in the meantime.
- Choose stainless over galvanized. It’s a small step up at install and it holds up to Garland’s humid stretches far better, so you’re not paying to replace a rusted cap a few years down the road.
- Get the liner checked at the same time. If we’re already on the roof for a crown, we can look at the flue liner without a second trip. Catching a cracked liner early keeps it a repair instead of a restoration.
- Ask for a written estimate before any work starts. The estimate is free, and the price on paper is the price you’ll be charged.
We carry the parts, not just the brushes. That means when we find a cracked crown or a failed cap, we can often fix it on the same visit instead of logging it on a report and sending you to someone else. We work with professional-trade materials like DuraFlex liners, HeatShield resurfacing, Gelco, Olympia Chimney, Famco, and Copperfield caps, the same parts certified restoration contractors use, not the big-box substitutes that rust out in a couple of seasons.
If you’d rather have a number before you decide anything, call (855) 974-6812. We answer 24/7, and the estimate is free. Fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in Garland?
A standard chimney cap installed in Garland typically costs $180 to $320 for a single flue. A custom-fit cap for a multi-flue or oversized chimney runs $320 to $420. Stainless caps cost a little more than galvanized but hold up better to our humid weather. Call (855) 974-6812 for an exact quote, and the estimate is free.
How much does it cost to rebuild a chimney crown?
A full crown rebuild in Garland usually runs $750 to $1,200, while a resurfacing over a sound crown costs $550 to $950 and a simple crack seal sits around $400 to $650. The difference comes down to how deep the damage goes. We’ll tell you which one your chimney actually needs rather than defaulting to the most expensive option. Call (855) 974-6812 to book a free estimate.
Is it cheaper to repair or replace a chimney crown?
Repair is cheaper when the crown is cracked on the surface but still solid underneath, at roughly $400 to $650 versus $750 to $1,200 for a full rebuild. Replace it when the crown has crumbled through or no longer sheds water, because a failed crown lets water into the masonry and that water damage costs far more to fix than the crown itself. Our crew will show you what we’re seeing so the call is yours to make. Call (855) 974-6812.
Can you do chimney cap and crown work the same day?
Often, yes. When the flue size matches a stock cap and the crown job is a reseal or resurface, we can typically complete both in a single visit. Custom caps and full crown rebuilds may need a return trip for the materials to set properly. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday.
Why do chimney crowns crack so often in Garland?
Garland’s clay soil moves with the wet and dry seasons, and that movement puts stress on masonry above it. Crowns poured without a proper overhang or expansion gap crack sooner, and our humid springs and hot summers speed up the wear. A properly built crown with the right slope and overhang sheds water for decades. If yours is pitted or cracked, call (855) 974-6812 for a free look.
Get a Straight Number on Your Cap and Crown
A chimney cap and crown are small parts of the house that protect everything below them. When they fail, water gets into the flue, the masonry, and eventually the framing, and the repair bill grows with every season you wait. We’d rather give you a clear, written estimate for the right fix than a vague “it depends.” Our team handles chimney sweeping, dryer vent cleaning, and chimney repair in-house, so the same company that spots a problem is the one that fixes it. For Garland homeowners who use their fireplace and want it done right, we bring the professional-grade parts and the trade skill to bring your chimney back to safe operating condition.
We’ve served the Garland area since 2016, and in that 10 years we’ve built our work around one idea: a service call should leave a system in better shape than we found it, not just checked off a list. Whether you need a cap this week or a crown rebuild before the next rainy stretch, call (855) 974-6812. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday. Every estimate is free, and the written price is the price.
Pricing reflects the Garland market as of 2026. Dayspring Chimney Sweep offers free estimates – call (855) 974-6812.
What Our Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Norma Hernandez"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Andres Guzman"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Elena Martinez