Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Services Cost in Garland?
Fireplace services in Garland typically run $89 to $325 for a chimney sweep and inspection, $450 to $1,800 for flue liner work, and $350 to $1,400 for crown and masonry repairs. Most Garland homeowners spend around $200 to $450 on a first visit that covers cleaning, a full inspection, and any small fixes the sweep can handle the same day.
A fireplace that draws properly, burns clean, and has no cracks in the flue is a safe fireplace. One that doesn’t is a real hazard. The cost of service depends less on the size of the house than on what the chimney system is doing – how much creosote has built up, whether the flue liner is intact, and whether the crown and mortar are still shedding water the way they should. Dayspring Chimney Sweep works on Garland homes with both wood-burning fireplaces and dryer vents, and we carry the professional-grade parts to fix what the inspection finds instead of handing you a report and a list of phone numbers.
Every job here starts with a free estimate. Pricing is set per job by the written estimate, so you know the number before any work begins. Call (855) 974-6812. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Fireplace Services Cost Breakdown (2026)
These are typical estimated ranges for the Garland market as of 2026. Your written estimate sets the final price, and it won’t move after the work starts.
| Service | Typical Cost Range | What It Covers |
|---|---|---|
| Chimney sweep and inspection (standard wood-burning fireplace) | $89 – $325 | Flue brushing, creosote removal, visual inspection of liner, crown, damper, and firebox |
| Dryer vent cleaning | $79 – $225 | Full-length lint and debris removal from the duct run, exhaust check |
| Chimney and dryer vent cleaning in one visit | $120 – $420 | Both primary fire-hazard venting systems in the home during a single appointment |
| Flue liner installation (stainless, by the foot) | $450 – $1,800 | DuraFlex or Olympia Chimney stainless liner sized to the flue, with insulation and connections |
| Crown repair or rebuild | $350 – $1,400 | Cracked or crumbling crown resealed or recast, mortar repair at the top of the chimney |
| HeatShield resurfacing | $600 – $1,600 | Ceramic resurfacing of a damaged flue interior, restoring the liner surface without a full tear-out |
| Tuckpointing and mortar repair | $250 – $900 | Repointing deteriorated mortar joints in the stack and firebox surround |
| Damper repair or replacement | $150 – $500 | Damper blade, hinge, or handle replacement so the flue seals when the fireplace is idle |
| Fireplace and firebox restoration (Gelco, Famco, Copperfield components) | $400 – $2,200 | Refractory panel, firebox, and component replacement using trade-grade parts |
What pushes a Garland fireplace job toward the top of a range is usually structural work, not cleaning. A standard sweep on a clear flue stays in the low band. Add a cracked liner, a crown that’s let water into the stack, or a firebox that needs new refractory panels, and the number climbs because the materials and labor climb with it. Cleaning is quick and predictable. Repair is not, until someone gets on the roof and looks.
What keeps the price down is early action. A small crown crack repaired while it’s small is a fraction of the cost of a stack that’s been taking water for several seasons. The same logic applies to a flue liner. A hairline crack is a resurfacing candidate. A flue with heavy glaze creosote and a failing liner needs a full stainless install. The earlier the inspection happens, the more of these choices stay on the cheaper side.
What Affects Fireplace Services Pricing in Garland
- Creosote level and stage. A flue with a light dusting of soot brushes out fast. Glaze creosote, the hard, tar-like third stage that builds up when a fireplace is burned hot and choked, takes more time and sometimes a chemical treatment before brushing. That’s the difference between a base sweep and a longer job, and it’s the single biggest driver of cleaning cost on a Garland fireplace.
- Flue liner condition. The liner is the system, and it’s what protects the framing of the house from the heat of the fire. A stainless DuraFlex liner sized and installed correctly is the standard fix for a cracked or missing liner, and the cost scales with the height of the chimney and the flue’s dimensions. Taller stacks and flues with offsets cost more than a straight run.
- Roof access and chimney height. Garland homes vary from single-story ranch layouts with easy roof access to taller two-story stacks where getting to the crown takes more setup. Chimney height also affects liner length, crown work, and how much scaffold or ladder work the job requires.
- Masonry condition. Deteriorated mortar joints, a cracked crown, and spalling brick on the stack are common on older Garland homes. Tuckpointing, crown repair, and masonry work carry material costs for mortar and refractory components, and the scope depends on how far the damage has spread.
- Firebox and refractory panels. Cracked firebox panels, a failing damper, and worn refractory brick are all repairable, and the parts themselves drive a share of the cost. We carry professional-trade parts – Gelco, Famco, Copperfield, Olympia Chimney – so a repair doesn’t stall waiting on a supplier.
- Dryer vent run length and layout. A short, straight dryer vent cleans in one pass. A long duct with elbows, or a run that’s been neglected for years, takes more time and equipment. Garland homes with the laundry room on an interior wall or up a floor often have longer duct runs, and those cost more to clear properly.
One local note that matters for Garland pricing: a large share of the housing here went up in the 1960s through the 1980s, and a lot of those homes have chimneys that were built with clay tile liners. Clay tile was the standard then and it was fine when it was new, but it cracks and spalls with age and heat. When we inspect an older Garland home, the liner is usually the deciding factor between a cleaning-only visit and a repair plan. If the tile is intact, you’re in the lower range. If it’s cracked, the written estimate will show the liner cost up front.
How to Save on Fireplace Services
The cheapest fireplace service is the one you don’t defer. Here’s what actually lowers cost in Garland.
- Get the sweep and the dryer vent done in one visit. Both are fire hazards, both need to be clear, and handling them in a single appointment means one dispatch, one trip on your schedule, and a lower combined total than booking them separately.
- Fix the crown before it becomes a liner job. A cracked crown lets water into the stack. Water rots mortar, rusts dampers, and can eventually damage the liner. Crown repair is a modest line item. A full liner replacement plus masonry work is not. Deal with the crown crack while it’s still a crown crack.
- Ask for a written estimate before any work starts. A written number protects you from a running total. Every job at Dayspring starts with a free estimate, and the price is set per job – no surprises after the technician’s on the roof.
- Know what resurfacing can save you. When the flue interior is damaged but structurally sound enough, HeatShield resurfacing restores it at a fraction of the cost of a full liner tear-out. Not every flue qualifies, but when it does, it’s the more economical repair. That’s a judgment we make on-site, and we tell you honestly which one your chimney needs.
- Book the inspection now, not after a problem. A sweep with a full inspection catches small issues while they’re still cheap. Call (855) 974-6812 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Saving money on fireplace work isn’t about finding the lowest quote. It’s about getting the right diagnosis the first time. A sweep who inspects but can’t repair will hand you a list of problems and send you to someone else. Dayspring carries the parts, so the repair happens in-house with the same company that spotted the issue. That’s how you avoid paying twice for the same trip up the ladder.
Does Dayspring Serve Garland and the Surrounding Area?
Yes. We handle chimney sweeping, dryer vent cleaning, and chimney repair across Garland, and we’ve been doing this work since 2016. Ten years in the trade has taught us how these chimneys age in North Texas, and the pattern is consistent: clay tile liners that need resurfacing or replacement, crowns that have cracked from age, and dryer vents buried behind years of lint. Garland homes get the same honest inspection and the same written estimate before work starts.
If you’ve recently bought an older home in Garland and the seller’s inspection flagged the fireplace, we can give you a second look and a real repair plan. We’re a repair-capable sweep, which means the inspection report doesn’t end with a referral. It ends with a fix.
Are Fireplace Services Worth the Cost in Garland?
Yes, and not for the reason you might think. A fireplace that’s swept, inspected, and repaired is a fireplace that’s safe to burn. Creosote in the flue is the fuel for a chimney fire, lint in a dryer vent is the fuel for a dryer fire, and both are preventable with a service call that costs less than most home repairs. The value isn’t convenience. It’s removing two of the most common home fire hazards in one visit.
There’s also a resale angle that matters in Garland. When you sell a home here, buyers’ inspectors look at the fireplace and the dryer vent. A chimney that’s been maintained with documentation and repaired with trade-grade materials makes that inspection easier. A chimney with a cracked crown and a failed liner makes it a negotiation. The cost of getting ahead of it now is smaller than the cost of fixing it under pressure later.
FAQs – Fireplace Services Cost
How much does a chimney sweep cost in Garland?
A chimney sweep in Garland typically costs $89 to $325 for a standard wood-burning fireplace, and that includes a visual inspection of the liner, crown, damper, and firebox. Heavier creosote, taller stacks, or a repair scope on the same visit push the number toward the top of that range. Call (855) 974-6812 for a free estimate on your specific chimney.
Is it cheaper to resurface a flue or replace the liner?
Resurfacing is usually the cheaper option when your flue qualifies. HeatShield resurfacing typically runs $600 to $1,600, compared with $450 to $1,800 for a full stainless liner install. Whether your chimney can be resurfaced depends on the condition of the flue interior, which is why the inspection comes first. We tell you which repair your chimney actually needs. Call (855) 974-6812 to schedule the estimate.
Can you clean the chimney and the dryer vent in one visit?
Yes. A combined chimney and dryer vent cleaning in Garland typically costs $120 to $420 and covers both systems in a single appointment. Both are primary fire-hazard venting systems in the home, and both need to be clear. One visit handles both, which saves you a second dispatch and a second block of time. Call (855) 974-6812 to book.
How much does crown repair cost in Garland?
Crown repair or rebuild in Garland typically runs $350 to $1,400, depending on whether the crown can be resealed or needs to be recast. A cracked crown lets water into the stack, and water is what damages liners and mortar over time. Repairing it while it’s still a crown issue is far cheaper than dealing with the liner later. Call (855) 974-6812 for a free written estimate.
What happens when I call for a fireplace service estimate?
We ask what kind of fireplace you have and what you’re seeing, then we book a visit. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. The estimate is free, the price is set per job by the written estimate, and we don’t start work until you’ve approved the number.
Get a Free Fireplace Services Estimate in Garland
You don’t have to guess what your fireplace needs. A free estimate from Dayspring Chimney Sweep gives you a written number for the work, based on a real inspection of your chimney and, if you want, your dryer vent. We work with professional-trade materials – DuraFlex liners, HeatShield resurfacing, Gelco, Olympia Chimney, Famco, and Copperfield – and we handle cleaning and repair under one roof, so a problem doesn’t get passed to an unknown subcontractor. Ten years of serving Garland homeowners means we’ve seen what these chimneys do, and we know how to bring yours back to safe operating condition. Call (855) 974-6812. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Garland market as of 2026. Dayspring Chimney Sweep offers free estimates – call (855) 974-6812.
What Our Customers Say
"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Andres Guzman"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Elena Martinez"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Danielle Novak